Safe driving is the most important thing in our daily driving, whether or not we use the tire properly directly influence the traffic safety. Along with the increasing safety awareness of motorists, more and more people pay attention to the maintenance of tires. How to take good care of of the tires is really a big knowledge. All drivers know the costly expenses associated with replacing a vehicle’s tires. While no tire last forever, it is possible to extend the life of a tire with a few simple steps. By adhering to a regular tire maintenance routine, you can save money and keep safe on the roads
1. Daily Inspection
In the daily automobile maintenance, vehicle lovers ought to regularly check the tire condition, whether there is swell, crack, cut, pinning or abnormal abrasion on the tires, especially on the tread edge. Make sure nothing that can damage your tires has been placed near your tires. This includes nails, glass and other sharp objects. A nail in a tire may not cause an immediate flat tire, but could result in a slow leak of tire pressure or a future flat tire. Besides, repair any small cuts and holes you find on your tires, and replace the tires with large holes or abrasions in them.
2. Check Inflation Pressure
The biggest influence on tire life is inflation pressure. You can see the recommended inflation pressure imprinted directly on the tires, which is a good guide to determine the optimum inflation pressure for your tires. The recommended pressure of the car manufacturer and the tire manufacturer may vary slightly, as promoting a lower pressure improves drive performance, while a higher pressure extends the life of the tire. However, avoid over-inflating your tires, as this may cause extensive tread wear in the center of the tire. Once the correct inflation pressures are determined, write them down and maintain the tires. It is recommended that check the tire at least once a month, which always be done when the tires are fully cold, otherwise you will get erroneous readings.
3. Check and Replace the Worn Wheel & Suspension Components
These can be the hidden enemies of tire life. A wheel bearing that is not properly torqued can cause irregular tire wear. Worn shock absorbers can create depression wear on tread and shorten the service life of tires. People with fluke mind often wait until the suspension components are obviously broken. By then, the tire damage has already occurred. Replace shock absorbers and other suspension components on a set schedule rather than waiting until they fail.
4. Regular Rotation
In order to correct for uneven wear patterns caused by road and driving conditions, your tires should be rotated every 5,000-10,000 miles. Typically, rear tires wear quicker than the forward positions. Regular and consistent tire rotation promotes even tread wear and allow you more time to correct any suspension problems. You may find it convenient to rotate your tires every other time you get an oil change. Some drive tires will also develop heel and toe wear. This can be evened out by reversing their direction. It is prohibited that install the tires with different models and using degrees on the same axis.
5. Keep Your Tires Properly Aligned
Improper setting of your vehicle alignment can lead to increased fuel usage, uneven tire tread wear and difficulty maintaining a straight course. If the tires are not running straight ahead, accelerated tread wear occurs on parts of the tire. Your alignment should be checked every 5,000 to 10,000 miles, depending on the condition of the roads and your driving habits. Therefore, your tires should be balanced and aligned, ensuring that your tires remain perpendicular to the ground and parallel to each other.
6. Keep Good Driving Habits
In our daily driving, we try to choose good roads and develop good driving habits, thus effectively reducing the tire wear. When driving on rough road, we should drive slowly to lighten the impact between tire and road surface and prevent the damage of tires and the components.